Pulse® Elite V3 Hubset

World renowned for their performance and reliability, Pulse Elite hubs are a benchmark in the world of racing BMX.

Third version, this one is further optimized in terms of quality and performance. This latest version changes its alloy from 7075 to 7050 for a small improvement in fatigue resistance.

The rear driver is now cold-forged before machining to improve the mechanical properties of the block. The groove of the labyrinth seal has been reworked to be more resistant and provide better sealing.

The rear axle has been completely revised and now offers ultra-simple bearing preload adjustment and does not require any tools for disassembly.

A new sprocket tightening nut, compatible with BSA bottom bracket wrenches.

Safe, reliable hubs requiring little maintenance and without the risk of stalling or loss of power transmission. 

Front hub:

• Designed in Montbrison in the Loire.
• A quality 7050T6 aluminum alloy.
• Enduro Bearings in CrMo 100C6 steel for extreme conditions with Kyodo Kushi teflon grease.
• Compatible for 20mm, 10mm and 3/8" forks via Pulse axles or reducers.
• An exceptional finish with laser engraving of the logo and quality anodizing.

Rear hub:

• Designed in Montbrison in the Loire.
• A quality 7050T6 aluminum alloy.
• A freewheel body made of SCM430 steel with heat treatment.
• Sprocket tightening system using internal thread with standard Shimano BSA key.
• The fastest ratchet engagement system on the market.
• Sealing by labyrinth seal.
• Enduro Bearings in CrMo 100C6 steel for extreme conditions with Kyodo Kushi teflon grease.
• Tool-free rear hub bearing preload adjustment system and bearing wear compensation.
• Rear axle without stop, removable without tools.
• Instant engagement via 6 ultra-wide and ultra-short ratchets for 288 engagement points.
• Less engagement angle than the engagement angle of unidirectional bearing Onyx/Stealth/SD hubs*.
• Disc brake compatible via the Shimano Center-lock system.
• An exceptional finish with laser engraving of the logo and quality anodizing.

* For pression > to 62Kg on pedal and > to 80Kg for Ultra and Ultra SS model.

Main Features:

• 36/36 spokes.
• Comes with a 16 tooth stainless steel sprocket.
• Delivered with 20mm thru axle or reducer for 10mm and 3/8" inch fork depending on option chosen.
• Compatible for 120mm, 140mm and 160mm discs.

Front hub assembly data:

- Center distance: 100mm

- Flange/left axle edge distance: 16mm

- Flange/straight axle edge distance: 16mm

- Left flange hole diameter: 48mm

- Right flange hole diameter: 48mm

Rear hub assembly data:

- Center distance: 110mm

- Flange/left axle edge distance: 35mm

- Distance between flange and right axle edge (driver side): 30mm

- Left flange hole diameter: 48mm

- Right flange hole diameter: 57mm